1. According to the operation status of the pattern conveyor belt, timely adjust the relevant equipment. Avoid the pattern conveyor belt deviation, belt wear, damage up and down cover glue.
2. Timely remove the attachments on the outer surface of the transmission drum to avoid blistering caused by uneven force on the joint due to the irregular surface of the drum and the elongation of the vulcanized joint.
3. Vulcanization joint is the weak part of the strength of the pattern conveyor belt. When water enters the pattern conveyor belt through the gap of the core rubber and breaks the wire, the elongation change and abnormal appearance change of the joint should be checked in time, and the defects of the vulcanization joint should be found and corrected in time.
4. As for the conveyor belt of steel buckle joint, we should also be diligent to check whether there is any change at its joint, so as to make a prediction and not affect the use.
5. Assuming that the side rubber of the patterned conveyor belt has some defects such as peeling off and partial exposure, according to the damage condition, different correction methods such as cold repair and hot vulcanization are selected to adhere to the appearance of the patterned conveyor belt.